1
How to print the buffer ?
At the programmer software, click manu,select Buffer －>Save Buffer; Open with notepad, and print.
2 Why Superpro/L+ and Z appear the communication error under win2000/XP ?
In the WIN2000/XP operating system, tacitly approves and the mouthworking pattern is not in original WIN9X/ME EPP or the ECP pattern, as a result of the communication agreement change, the programming is unable with the computer and the mouth grasps the seat of honor,therefore the communication is not successful. In view of this kind ofquestion, some two methods may attempt:
1st, and the mouth LPT working pattern will change EPP or ECP in CMOS;
2nd, one can solve the overwhelming majority computer communicationthrough the plan to make a mistake the question, if the situationstill were unable to solve, only had adopts to old exchanges theservice, changed into the new generation of USB series programming tosolve.
3 What is ISP programming? How does it work?
When selecting devices, you will always find ISP in the brackets behind some ICs. If a device supports online programming, that is, IC has been welded on the PCB, but you have to reprogram without disassembly, then ISP programming is your need. Besides, some devices without corresponding adapters also need ISP. Ours is ISP-HEADER01, containing 10 feet, Connection mode is introduced detailed in software (Note: Not all IC support ISP).
4 When viewing devices list, I find one IC has two or more adapters to support. How can I choose?
It often appears in SUPERPRO/3000U. Adapters contain general adapters and special adapters. Special adapters are tailor-made for individual devices, so they only support less IC than general adapters, yet some of these ICs can't be supported by general adapters. If one IC can be supported by two adapters, you should choose according to production and later expansion of other chips. Take HD64F3684GFP-TQFP64 For example, it belongs to RENESAS, and can be supported by two adapters, which are TA043-B006 (a special adapter) and PEP+S616 (a general adapter). Users can choose by themselves.
5 Why it always takes much time to response when programming large-capacity devices such as NANDFLASH?
As the unique character characteristics of SUPERPRO/9000U, it loads program automatically whenever operated. If the FLASH’s capacity is small, no significant time differences can be found, but for large capacity, it will take a long waiting time. Solution: as little duplicated modification of BUFFER as possible, once having chosen don't repeat the operation.
6 Why my Superpro/9000U can't connect the computer?
First check hardware and drivers. Whether SUPERPRO/9000U is in the on-line mode or offline mode, the standard CF card must be inserted in the programmer.
